1. Below is a list of materials and tools that I used to make this. This could be easily modified depending on what you have available.Materials: A...

2. The hinge needs to be attached to both plates. I used the hinge as a template for where to drill the holes and then drilled and tapped the holes...

3. To be able to adjust the angle, a bolt is used that pushes against the hinge. I used a small chunk of steel, not sure the exact dimensions but p...

4. I have seen other designs use a plastic plate on the bottom and I though it was probably there to reduce friction but I wanted to look up the fr...

5. Now that it was mostly complete it was time to tighten the hinge and start cleaning it up. To set the hinge, you need to use an hex key wrench t...

6. Because the bolt post is pretty far back and I used a long bolt, I have a large degree of adjustment. I can pretty much go 45 degrees in either...

7. As I stated before, I didn't like how big the 3 inch tall front plate was so I replaced it with a 2 inch tall plate. If I were to lower my tool...

8. If you want, this is as far as you need to go to have a functional grinding jig. I made some more additions that I will show in the next steps B...

9. During my test grind, I found that it was easy to accidentally adjust the angle when grinding. I originally wanted to put in a set screw but hel...

10. It was difficult to adjust the bolt by just turning the end of it so I decided to 3D print a simple knob that I glued to the bolt to make it ea...